FIRE ALARM PANEL
 
PROGRAM  Fire  Alarm  Control Panel, Model: PE-FA480 is manufactured and tested in accordance with EN 54-2 : 1997 (which is equivalent to MS1745-2 : 2004) and also conformed to the local CIFS requirement.
 
These controls are housed in a signal red metal enclosure with a glazed panel in front for clear visibility of the control and indications. The benefits of this product, it is cost-saving, user friendly and it could fit into various brands of conventional detectors. This is applicable for all hospital, campus, schools, factories, commercial buildings and office buildings.
 
FEATURES & INDICATIONS
Main and  D/C on Indicator         
Buzzer Mute Switch
Main Fail Indicator          
Buzzer resound
Battery Fail Indicator     
Main on/off Switch
Charter Fail Indicator     
Test Lamp Switch
Bell Line Fail Indicator   
Test Zone Alarm, Fault and Isolate Switch
Zone Fire, Fault and Isolate Indicators   
Test Battery Push Button Switch
Evacuate  Switch and  Indicator 
Master Reset Push Button Switch
Fire Station Isolate Switch and Indicator              
Pumpsets status
Bell Isolate Switch and Indicator
CO-2 Discharge Status Auxiliary Trip Isolate Switch and Indicator
 
No. of 
Zones
Model
Normal
Size in mm 
(W x H x D)
Mimic
Size in mm 
(W x H x D)
2 to 6
PE/ FA 20 -60
510x535x 204
S60x 1170x230
8 to 12
PE / FA80 120
510x586x204
560x 1220x230
15 - 24
PE/ FA 140 -240
610 X 775 X 204
610 X 1401 X 230
27 - 36
PE/ FA 260 -360
610 X 1026 X 230
610 X 1534 X 230
39 - 48
PE/ FA 380 -480
610 X 1162 X 230
610 X 1670 X 230
 
Power Supply Input                      
240V AC 50Hz
Operating System
24V DC
Charger
Automatic/Trickle Type
Charging Rate
300mA (Trickle) and 2.5A (Boost)
End Of Line
8K Ohms
Auxiliary Output
24V 1Amp
CMS Output
N/O Contact
STANDBY MODE
 
Master
75mA
Per zone (with detectors)
5mA
ALARM MODE
 
Master
140mA
Per Trigger Zone
50mA
Output Devices
150mA
Per Bell
30mA